The Málaga Clusters for the MALLBA Project
Table of Contents
- How to log in
- General Software
- Disk configuration
- Initizalization scripts
- MA-Cluster Software
- MA-Cluster Environments
- MA-Cluster Contacts
- Frequently Asked Questions
1. IntroductionThis document is intended to provide a description of MA-Clusters, the workstation clusters we are enabling in Málaga to use in the MALLBA project.
This page is continuously
2. HardwareThe cluster is actually composed of a set of computer groups:
As you can see, this is a set of heterogeneous hardware resources with different parallel features. It follows a detailed description of every kind of cluster. Machines belonging to the same cluster share the same hardware configuration.
- Digital AlphaServer
- Cluster of SUN4
- Clusters of PC's
- Isolated Worstations
2.1. DIGITAL ALPHA SERVER 4100 5/300
The AlphaServer is a multiprocessor containing 4 internal microprocessors Alpha 21140-AA at 300 MHz with 256 MB. Each processor has an external caché with 4 MB. At present, 4 AlphaServers are available, each one running Digital UNIX 4.0D (with Pthreads standard), interconnected by a Memmory Channel network. This yields a total of 4x4=16 processors.
Every single processor has the following hardware characteristics:
Here follows the name and IP address of these machines:
- Processor: Alpha 21140-AA, 300 MHz
- Main memory: 256 MB plus external caché with 4 MB
- Hard Disk: 8 GB each AlphaServer (two of them have additional 4 GB)
- Network adpater: External 10/100 Mbps - Internal memory channel
IP adress Name
22.214.171.124 memch0 (4 processors)
126.96.36.199 memch1 (4 processors)
188.8.131.52 memch2 (4 processors)
184.108.40.206 memch3 (4 processors)
2.2. CLUSTER OF WORKSTATIONS SUN ULTRA 1
This cluster can be readily utilised by MALLBA users to run processes in any of its 8 SUN Ultra 1 machines. The operating system is Solaris 2.5, allowing both Solaris and Pthreads thread libraries. The hardware configuration of every Ultra 1 is:
Here follows the IP address of these machines. The second column contains the FastEthernet names of the workstations, while the third column describes the ATM names of the machines. Every machine has two adapters. By using the FastEthernet/ATM name the application gets automatic
- Processor: ULTRASparc I, 143 MHz
- Main memory: 64 MB plus external caché with 512 KB
- Hard Disk: 2 GB
- Network adpater: FastEthernet 10/100 Mbps - ATM 155 Mbps (2 adapters)
access to each type of LAN.
IP adress FastEthernet ATM
220.127.116.11 cluster0 catm0
18.104.22.168 cluster1 catm1
22.214.171.124 cluster2 catm2
126.96.36.199 cluster3 catm3
188.8.131.52 cluster4 catm4
184.108.40.206 cluster5 catm5
220.127.116.11 cluster6 catm6
18.104.22.168 cluster7 catm7
2.3. CLUSTER OF PCs
The cluster of PCs will be made up of 8 Pentium III machines with both Windows NT and LINUX operating systems. We finally envision this cluster as being composed of 16 processors and a Myrinet high-speed connecting network, as stated in the MALLBA project. Since processors and adapters are being purchased and since we want to enlarge the life of this cluster as much as we can, we have initially located only 8 processors interconnected by a 10/100 FastEthernet
In summary, this cluster is at present composed of 8 machines with FastEthernet with the following hardware configuration:
Here follows the name and IP address of these machines. These addresses and names are COMPLETELY TEMPORARY values assigned untill their completed installation. In fact, IP addresses are fictitious (!).
- Processor: Pentium III, 500 MHz
- Main memory: 128 MB
- Hard Disk: 6 GB (NT) + 6 GB (Linux)
- Network adpater: FastEthernet 10/100 Mbps (plus Myrinet in the forthcoming months...)
IP adress Name2.4. ISOLATED WORKSTATIONS
The LINUX machine trueno.lcc.uma.es has been temporarily arranged to support some users relating the MALLBA project. It can be used to measure latency and bandwith values between any MALLBA node and our node located in Málaga.
At present, this machine is being used as an NT worstation during the day and with LINUX from afternoon to next morning. People wanting an account login is kindly requested to send an email to the persons listed in the "contact" section (at the end of this page).
The processor has the following hardware characteristics:
- Processor: Pentium II MMX, 233 MHz
- Main memory: 64 MB
- Hard Disk: 2 GB (NT) + 1 GB (Linux)
- Network adpater: 10/100 Mbps FastEthernet Card
3. How to log inBy now, the preferred connection to these machines can be made directly from your workstation by using the IP address since adding the domain name to the machine's name, e.g. memch.lcc.uma.es might still not work. Please, report every problem you could detect whatever the access type is being used. Since we have recently moved to completely new installations and since our building is suffering (really suffering) continuous updates be so kind of reporting us any detected access error so we can solve it.
Login names have been set to your usual email address to improve commodity. Passwords and additional account changes can be made by request to the persons in the contact list below.
- Web Access
- Remote Connections to LCC
4. AvailabilityThe described computers are available at any time during the week. The trueno machine is available only from afternoon to morning.
5. ConnectivityNot yet written.
6. General SoftwareDetails on the software will be added to the section describing each cluster. However, we mainly can state that:
Additional software such as Java, C++, and parallel libraries are listed in the MA-Cluster specific software section (below).
- The multiprocessor has a Digital UNIX 4.0D operating system
- The worstation cluster has Solaris 2.7 operating system
- The cluster of PCs has Windows NT/Linux Redhat operating suystems
- The trueno machine has also Windows NT/Linux Redhat operating suystems
7. Disk ConfigurationEvery account has a reasonable disk space to work with. Additional room will be provided upon demand. By now, users are requested to hang any directories and software in their home path.
The three clusters (memch, workstations, and PC's) have NFS active. As to the cluster of workstations the user accesses a local disk partition by default. However, by cd-ing to /cluster0/home/cluster/users/<username> he/she can access by NFS his/her additional disk room in cluster0, where all the software is directly stored and configured.
8. Initizalization ScriptsUntil now, no automatic initialization scripts are provided.
9. MA-Cluster SoftwareThe following software is available on MA-Cluster machines:
C and C++ Compilers: GNU and OS-own compilers are provided for C and C++ applications.
JDK: The Java Developer Kit. Current installed version is 1.2 in the AlphaServer and PC's cluster, and 1.1 in the workstation cluster (it will be upgraded to 1.2 in a few weeks).
MPI: If we finally end by using MPI for the middelware system MPICH and/or LAM will be readily available for users in all the clusters.
10. MA-Cluster EnvironmentsMost software packages need to stablish environment variables. Compilers are directly available. Further software changes will be accompanied of a description on how using it.
11. MA-Cluster Contacts
12. Frequently Asked QuestionsNone, everything should be quite clear at this point :-)
Last update: Wednesday March 3 09:00:0 LCC 2000